Durango Ceiling Fan

The Durango Ceiling Fan
The Durango is one of our most popular fans. It is made of incredibly realistic resin hand painted to look like tooled leather. It comes standard with a heavy duty motor and wall control. We also carry a coordinating line of lights shown below to complete the amazing western styling for your home.

Durango Ceiling Fan
Cost is $423.41 and includes the wall control as shown at far right. The control runs off a battery ( included) and does not have to be hooked up to any wires running to the fan, making it easy to install anywhere in the room.
In Stock

Durango model 5DOR52WI shown with optional MC138 light kit $523
In Stock

MC138 Matching light kit is also a Ceiling Light or a pendant. The pendant model also works as a semi-flush model for sloped ceilings. Uses 3-60W candelabra bulbs $99 or $119 for pendant or semi-flush model

The included wall control has 3 fan speeds and full range light kit dimmer. The control can be mounted anywhere in the room and uses a long life battery to operate the fan.

Normally in Stock for Fast Shipping

Matching Lights to our Famous Durango Line

Actual pictures from our customers - Click to expand

Model MCDO1WSWI
16.5" T x 7" W x 8" D and uses 1-60W candelabra bulb. The back plate that goes against the wall measures 8.5" tall plus 1.5" more for the loop on the bottom by 7" wide.
$84

In Stock

Model MCDO6CHWI
Weathered Iron Finish with Faux Leather Shades Length: 33" W x 28" T and uses six - 60 watt candelabra base bulbs
$607 In Stock

Model MCDO9CHWI
34" T x 33" W with 3' of chain and 5' of wire - uses 9 - 60W candelabra bulbs
$882

Normally In Stock

Model MCDO4PTWI
34" T x 26" W with 3' of chain and 5' of wire- uses 4 - 60W bulbs
$680
Normally In Stock

Model MCDO2FMWI flush mount
10" T x 16" W uses 2- 60W bulbs - also available as a hanging pendant for $30 additional.
$147 In Stock

Ceiling Fan Specifications

Available Colors

Weathered Iron motor with hand painted leather colored housing

Specifications

14 degree blade pitch, total height of fan is 15 inches (without light kit) - 8' ceiling or more required. 9' recommended with optional light kit, mounts on up to a 35 degree sloped ceiling with integrated slope adaptor in the canopy. Weight is approximately 38 pounds requiring a sturdy metal ceiling box to mount.

Motor Rating

Heavy duty 188 x 20 mm with 14 degree blade pitch

Blades

52" blade span with 5 blades, no optional blades available, as shown only

Controls

Wall control with reverse included, optional hand held control available so both can be used.

Extension Rods

The fan comes with an 5" long extension rod. Additional models are available in 12" ($10), 18" ($15), 24" ($22), 36" ($27), 48" ($34), 60" ($44) and 72" ($54). Most sizes are usually in stock and color matched to the fan.

Ext Rods

comes with a 5" extension rod, cannot be flush mounted due to weight, additional lengths up to 72" available at extra cost in 12, 18, 24, 36, 48, 60 and 72" increments.

Light Kits

Matching light kit is model MC138 as shown above $99

Location

Dry Location/Indoor Only