The Sedona Ceiling Fan

This attractive wood housing ceiling fan features a solid wood motor housing with decorative metal banding. It's softer, under spoken styling adds a warm feel to any rustic room. It can use a wide variety of light kits as shown below. The fan is ideal for bedrooms, offices and smaller family or living rooms. Normally in Stock


Model MC5SO52LI in lodge pine with weathered iron accent.


Model MC5SO52LI in lodge pine with weathered iron accent. Shown with optional MC79 Light kit and MC99 Scroll kit.
Scroll kit requires a 12" or longer down rod.

MC5SO52LI
Fan Only
Price: $218
Includes Free Shipping *
MC79
Antler & Bowl Light Kit
11" Wide by 8" Tall
Uses 2-60W candelabra bulbs
Price: $86
Longer Down Rod
For Sedona Fan
Color matched - Replaces fan down rod for higher ceiling installations.

Price: $16
MC99
Antler Scroll Kit
Includes longer down rod
(12" min. required for installation)


Price: $91
Fan Controls
WC11-IV
Price: $28
WC11-WH
Price: $28
WC12-IV
Fan Speed Only
Price: $22
WC12-WH
Fan Speed Only
Price: $22
MCCK300
Heavy Duty Remote Control
for 66" Magnum Fan
Converts to Wall or Hand Held control. Includes receiver. Battery operated. This wireless remote will allow you to add full fan and light controls without rewiring the existing fan circuit.
Price: $114
Fan Includes a 3 speed pull chain switch and manual reverse switch on the motor. All controls are non reversing. The wall controls fit into a single gang electrical box and use a standard rocker opening. 
Additional Fan Information
Specifications: 13 degree blade pitch, total height of fan is 13 inches (without light kit) - 8' ceiling or more required, works on up to a 35 degree slope, optional slope adaptor is good for up to 45 degree slope.
Locations: Dry Location/Indoor Only
Color: Natural lodge pine with metal accents as shown above
Blades: 52" blade span with 5 blades as shown here in lodge pine color
Motor Rating: Medium duty 172 x 14 mm